User Tools

Site Tools


o2imaging:molli_howto

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

o2imaging:molli_howto [2013/09/10 10:02]
127.0.0.1 external edit
o2imaging:molli_howto [2013/09/10 13:57] (current)
lpolerec
Line 3: Line 3:
 MOLLI-server adds TCP/IP communication capabilities to the original Look@MOLLI program (written by Bjoern Grunwald) that is used for luminescence-based oxygen imaging. MOLLI-server adds TCP/IP communication capabilities to the original Look@MOLLI program (written by Bjoern Grunwald) that is used for luminescence-based oxygen imaging.
  
-The instructions how to use the Look@MOLLI program are written in section 1.2 of {{:​polerecky-2005-imaging_of_oxygen_and_ph_in_2d_and_3d_using_the_molli_system.pdf|this manual}}.+The instructions how to use the Look@MOLLI program are written in section 1.2 of {{:imaging:​polerecky-2005-imaging_of_oxygen_and_ph_in_2d_and_3d_using_the_molli_system.pdf|this manual}}.
  
 ==== Remote control through TCP/IP ==== ==== Remote control through TCP/IP ====
  
-Imaging by MOLLI-server can also be controlled remotely using ASCII commands. Commands can be sent by any client connected to the MOLLI-server through the TCP/IP protocol (e.g., with [[g_client_howto|G-client]]).+Imaging by MOLLI-server can also be controlled remotely using ASCII commands. Commands can be sent by any client connected to the MOLLI-server through the TCP/IP protocol (e.g., with [[:software:g_client_howto|G-client]]).
  
 **Syntax** **Syntax**
o2imaging/molli_howto.txt ยท Last modified: 2013/09/10 13:57 by lpolerec